Automotive glass enamel for laminating cycles - S2

High-performance ceramic enamels for automotive glass

Laminating products - S2
   
 
 
 
Chemical Resistance
Product [1] Firing
Glass
Surface
Key Features
HCI [2]
 Citric Acid[3]
 Alkali[4]
 H₂SO₄ [5]
1L6026
• Matt
• 550°C - 620°C
S2
Pre-fire
High optical density at lower layer thickness, achieving better coverage efficiency.
Excellent non-stick performance.
5
2
2
4
1L6060 • Matt
• 550°C - 620°C
S2
Pre-fire
Stable jet-black colour over a wide working window to better guarantee process stability. 5 3 2 4
S2-IR • Matt
• 570°C - 640°C
S2
No Pre-fire
Requires no pre-firing, cost-saving product.
Improved printing properties, achieves optical density at lower wet layer thicknesses.
- - - 4
[1] - Glass temperature - data based on laboratory kiln conditions and should be used for comparative purposes only.The decoration media used could impact on the performance and working window of the fired product.
[2] - 3.7% HCl, 5 minutes, 20°C, assessment according to ASTM C724-91
[3] - 10% Citric acid, 15 minutes, 20°C, assessment according to ASTM C724-91
[4] - 0.1N NaOH, 24 hours, room temperature, assessment according to ASTM C724-91
[5] - 0.1N H₂SO₄, 80°C, check after 4, 24, 48, 72, 96 and 144 hours. Failure mode: when visible change in colour through the glass can be detected.

PRODUCT CODE: 1L6026
1L6026 is an automotive laminating glass enamel suitable for side 2 decoration of
windshields (with pre-fi ring) by screen printing, where silver hiding is not needed and is suitable for sag-bend and press-bending applications.
The product is an unleaded cadmium free bismuth-zinc based frit system pigmented with temperature stable inorganic pigments.
  • Fired Surface Appearance: Matt, Black
  • H₂SO₄ Acid Resistance [0.1N H₂SO₄, @ 80°C]: < 4 hours
 
Outstanding Features
  • High optical density at lower layer thicknesses
  • achieving better coverage effi ciency.
  • Suitable for S2 application with pre-fi ring
  • Excellent non-stick performance
 
Packaging Format
 
9 Litre Metal Drum approx. 12 - 14 Kgs
16 Litre Metal Drum approx. 25 Kgs
Packaging is based on powder dispersed in medium.
In-liner option available

PRODUCT CODE: 1L6060
1L6060 is an automotive laminating glass enamel suitable for side 2 decoration of
windshields (with pre-fi ring) by screen printing, where silver hiding is not needed and is suitable for sag-bend and press-bending applications.
The product is an unleaded cadmium free bismuth-zinc based frit system pigmented with temperature stable inorganic pigments.
  • Fired Surface Appearance: Matt, Black
  • H₂SO₄ Acid Resistance [0.1N H₂SO₄, @ 80°C]: < 4 hours
 
Outstanding Features
  • Stable jet-black colour over a wide working window to better guarantee process stability
  • Good non-stick performance
  • Suitable for S2 application with pre-firing
 
Packaging Format
 
9 Litre Metal Drum approx. 12 - 14 Kgs
16 Litre Metal Drum approx. 25 Kgs
Packaging is based on powder dispersed in medium.
In-liner option available

PRODUCT CODE: S2-IR
1L6060 is an automotive laminating glass enamel suitable for side 2 decoration of
windshields (with pre-fi ring) by screen printing, where silver hiding is not needed and is suitable for sag-bend and press-bending applications.
The product is an unleaded cadmium free bismuth-zinc based frit system pigmented with temperature stable inorganic pigments.
  • Fired Surface Appearance: Matt, Black
  • H₂SO₄ Acid Resistance [0.1N H₂SO₄, @ 80°C]: < 4 hours
 
Outstanding Features
  • Stable jet-black colour over a wide working window to better guarantee process stability
  • Good non-stick performance
  • Suitable for S2 application with pre-firing
 
Packaging Format
 
9 Litre Metal Drum approx. 12 - 14 Kgs
16 Litre Metal Drum approx. 25 Kgs
Packaging is based on powder dispersed in medium.
In-liner option available

Application sectors

Products menu

Request information

FENZI S.p.A Via Trieste Zona Industriale, 20067 Tribiano (MI) Italy
Tel +39 02 906221
Copyright © 2025, FENZI S.p.A. Tutti i diritti riservati - P.Iva 11328880155